Skip to content

Configure, sample and produce your supplement range in one place.

DAT Supply
Navigation
Profile

Creatine Performance 3G Sachets

Creatine Performance 3G Sachets is a private-label pectin-gummy supplement concept for brands building a sports nutrition range.

Creatine Performance 3G Sachets — generic packaging placeholder
Creatine Performance 3G Sachets — gummies format detail
Creatine Performance 3G Sachets — gummies format detail
Creatine Performance 3G Sachets — gummies format detail
As low as
€24.60 / unit
At order quantity
2,500 units
Minimum order 1,000 units Prices are exclusive of VAT
Format
Gummies
Daily serving
1 gummies
Units per pack
30 gummies
Servings / pack
30
Create your product

Creatine Performance 3G Sachets is a private-label gummy SKU available for private-label brand launches. Pectin-based formulation by default. Standard MOQ is 1000 units or 2500 units (doypack). Documentation pack included for the target market's notification regime.

The portioning problem a sachet format solves

Creatine's default format across sports nutrition is a loose powder tub and a scoop, which asks the end customer to eyeball a consistent portion every session. Creatine Performance 3G Sachets exists as a pre-measured single-serve alternative instead, carrying the same monohydrate without the scoop.

It is a single-active formula — creatine monohydrate is the only named ingredient on the panel — which keeps the sourcing story as direct as the sachet format itself. There's no companion ingredient competing for attention on the label, just the one recognisable active a training-focused buyer is already looking for, in a format built for a gym bag rather than a kitchen shelf.

Where this sits in a performance range

Catalogued under Performance, part of the Sports Nutrition family the registry defines for active-lifestyle brands building energy and recovery ranges, this sachet is the direct, no-frills option in that family rather than a blended or dose-tiered variant aimed at a brand building out a fuller stack.

It suits a brand whose audience already knows what creatine monohydrate is and doesn't need the ingredient explained — a straightforward sell built on name recognition rather than an educational pitch, and one that travels easily across the catalogue's EU, UK and wider international markets without needing a longer ingredient story to back it up.

Personalising and ordering the 3G sachet

Personalization covers approved flavour, colour and shape on this exact formula. With a single active on the panel, flavour does almost all of the personalisation work — creatine monohydrate on its own is known for a mild bitterness, and masking it well is most of the taste decision on a formula this direct.

Adding a second active, or building out a blended formula from this base, moves the project into Formula Adaptation instead. Claims plus market compliance remain the brand owner's responsibility throughout.

The actives in the standard formulation. Your final formula is confirmed with you before production.

Serving size
1 gummies
Servings / container
30
Pack count
30 gummies
Daily use
1 gummies
Gummy weight
3 g
Shelf life
24 months

Formula & nutrition

Values shown per recommended daily serving · % NRV (EU).

Active ingredients

Active Quantity % NRV
Creatine
Monohydrate
3000 mg —
Sodium
powder
60 mg —
Magnesium
Magnesium bisglycinate
80 mg 3%

8 studies · 1 active ingredient

View science →

Recommended use

Take 1 gummies daily. Do not exceed the recommended daily intake. Food supplements should not be used as a substitute for a varied and balanced diet and a healthy lifestyle.

Science behind the formula

Published research on the active ingredients in this product. Shown for reference only — we make no claim beyond the permitted EU wording. Strongest evidence first; studies are on the ingredient, not this finished product.

3 studies on 1 active ingredient

  1. Creatine MonohydrateMeta-analysisStrong evidence

    Creatine supplementation and body composition: a meta-analysis of randomized controlled trials

    Population
    Healthy adults (18-65 years)
    Studied dose
    3-5 g/day (with or without loading)
    Duration
    4-26 weeks

    Meta-analysis of 53 RCTs showed creatine supplementation significantly increased lean body mass compared to placebo, especially when combined with resistance training.

  2. Creatine MonohydrateMeta-analysisStrong evidence

    Effects of creatine supplementation on muscle strength and power: a meta-analysis of randomized controlled trials

    Population
    Healthy adults (18-65 years) involved in resistance training
    Studied dose
    3-5 g/day (with or without loading)
    Duration
    4-12 weeks

    Meta-analysis of 22 RCTs found creatine supplementation significantly improved upper and lower body strength and power compared to placebo, with moderate to large effect sizes.

  3. Creatine MonohydrateMeta-analysisStrong evidence

    Effects of creatine supplementation on performance in trained athletes: a meta-analysis

    Population
    Trained athletes (n=~500)
    Studied dose
    3-20 g/day (loading + maintenance)
    Duration
    4-12 weeks

    Meta-analysis of 22 studies found creatine supplementation significantly improved strength, power, and lean body mass compared to placebo in trained individuals.

Showing 3 of 8 — see the full research library for Creatine Monohydrate .

Documents

Documentation included with your order

DAT Supply is your contracting supplier. Every Private Label order includes the standard documentation for the DAT-supplied finished product, plus launch documentation for your selected market within the agreed scope. Independent lab testing is available on request.

View how documentation works →

  • Product specification Your confirmed formula, active amounts, serving, product configuration and packaging details.
    Included When your formula is confirmed
  • Nutrition & label data Product data, directions, warnings and nutritional / active information needed to prepare your label.
    Included With your specification
  • Artwork review & guidelines We review your artwork against the confirmed product information and provide label guidance before production. You approve the final artwork.
    Included Before production
  • Allergen information Product-specific allergen information based on the confirmed formulation and production information.
    Included With your specification
  • Market launch documentation Documentation prepared for your selected target market to support product launch and applicable notification or filing requirements. Requirements vary by product and market. Government filings and fees, translations, legalisation and additional market- or retailer-specific work are not part of the standard documentation.
    Included For your selected market
  • Batch release & traceability Your DAT finished-product batch / lot reference and the batch release and traceability documentation for the finished order.
    Included With your batch
  • Delivery documentation Packing list and applicable shipment / transport documentation.
    Included At dispatch
Third-party testing / Certificate of Analysis Optional Independent lab testing is available on request. Not part of the standard documentation: supplier CoAs and raw-material certificates, additional microbiology, heavy-metal or pesticide testing, retailer-specific due diligence, special certifications, export and legalisation, translations, and bespoke regulatory or legal work.

Documents land in your DAT Supply account as your order moves forward, based on the agreed product and scope. Final label use, market filings and product placement remain your responsibility unless expressly included in the agreed scope.

You may also like

Related options

FAQ

Frequently asked questions

  • Can I request a sample before ordering?
    Ready-to-ship samples of selected production-ready formulas are on the Samples page while in stock — not every product has one. To test a different flavour, colour or shape, configure this product; where the product offers a Personalization Sample, you can order one of that exact configuration at the review step. Samples are paid upfront, and you do not need an account to start.
  • What is the MOQ?
    Minimum order quantities for Creatine Performance 3G Sachets are set up front, not quoted: from 1,000 units in PET bottle, 2,500 units in doypack and 1,000 units in gummy sachet. Larger runs of the same formula stay Private Label, as a volume quote. A change to the formula itself is different: Formula Adaptation production starts from 3,000 packs per SKU; the minimum is fixed for each format.
  • What packaging is available?
    Packaging for this format: PET bottle · Doypack · Gummy sachet. Standard pack size for this product is 30 gummies per pack. More options open up at higher volumes, and you pick your pack when you build your product.
  • Can I customise flavour, colour or shape?
    Yes — the flavour, colour and existing shape options this format supports are choices you make when you build your product, at the same unit price and with no setup fee, from 2,500 units. Where the product offers a Personalization Sample, you can test them first. The formula stays the same. Changing the actives or the dosage means Formula Adaptation instead, which starts higher; claims work is a Custom Project.
  • Who produces and supplies this product?
    DAT Supply is your contracting supplier for the products it supplies. We manage the product, production and documentation workflow. The country of manufacture is confirmed for the specific products you choose.
  • What documents are provided?
    DAT Supply is your contracting supplier, and every Private Label order includes product specification, nutrition & label data, artwork review & guidelines, allergen information, market launch documentation, batch release & traceability and delivery documentation for the DAT-supplied finished product. Each one lands in your account at the point it exists — the specification when your formula is confirmed, the batch documents with your batch. Independent lab testing is available on request.
  • How long does production take?
    Standard production lead time is approximately 8 weeks after formula/specification, artwork and payment are approved. Shipping/transit is additional.
  • What happens after I place an order?
    Your order moves through the standard DAT Supply stages — sample, configure, approve artwork and specification, produce, deliver. Live order progress and every released document appear in your DAT Supply account, not on this public page. How ordering works →

Have questions?

Find answers about ordering, samples, packaging and production timelines.

Open Help Center

Contact DAT Supply

Need help with this product or a specific order? Our team replies by email.

Contact DAT Supply
Quick context request

Get manufacturing context

Drop your work email and a member of the DAT team will follow up with the right context for this product. Order documents, certificates and pricing are released in your DAT Supply account.

You will receive a short confirmation email. Order documents (specification, label data, batch documents) are released in your DAT Supply account once your order is under way.