Skip to content

Configure, sample and produce your supplement range in one place.

DAT Supply
Navigation
Profile

Lutein Eye Jelly

White-label functional jelly stick: 20 g stick, 30 per carton.

Lutein Eye Jelly — functional jelly reference image
Lutein Eye Jelly — functional jellies format detail
Lutein Eye Jelly — functional jellies format detail
Lutein Eye Jelly — functional jellies format detail
From
€5.30 / unit
Minimum order 3,000 boxes Prices are exclusive of VAT
Format
Functional jellies
Daily serving
1 jelly
Units per pack
10 jelly
Servings / pack
10
Create your product

DAT Supply white-label functional jelly stick delivering antioxidant and greens actives. Standard specification: 20 g squeezable stick in a printed foil-laminate sachet, 10 sticks per printed carton (200 g net). The base is water, sorbitol and a carrageenan-pectin gelling system, deliberately konjac-free, sweetened with sucralose (a stevia variant is available). Actives are specified in mg per stick, not as a percentage. One stick per day makes a 10-stick carton a ten-day supply. Standard production lead time is approximately 8 weeks after formula/specification, artwork and payment are approved. Shipping/transit is additional.

A three-active eye-care combination in stick form

Lutein Eye Jelly carries three named actives in its formula table — bilberry extract, lutein and zeaxanthin — rather than the single generic label many jelly-stick SKUs carry. Most jelly sticks in the Daily Vitamins line run on one or two actives, so this is one of the more ingredient-dense sticks on offer, with each active nameable on pack rather than folded into an unnamed blend.

The format is the catalogue's standard squeezable jelly stick: a foil-laminate sachet on a sugar-free carrageenan-pectin base, one stick standing in for a day's serving, sold in cartons sized for trial or retail. An eye-focused concept like this would default to a capsule almost everywhere else in the market, so a stick format gives a brand a different shelf presence for a familiar concept.

Where a vision-led jelly sits in a daily-coverage range

Daily Vitamins serves brands building a foundational daily-coverage multivitamin range, and within it Lutein Eye Jelly is a targeted, single-concern slot rather than a broad-coverage anchor. Vision positioning is otherwise absent from this catalogue's Daily Vitamins gummy list, making the jelly-stick format the concept's only current home.

Real range neighbours include Sea Moss Mineral Jelly and Vitamin D3 Jelly, both jelly sticks in the same Daily Vitamins line, and Daily Multivitamin Jelly, the range's broader-coverage jelly anchor. Stocking this SKU alongside those three builds a jelly-stick sub-range spanning a broad daily multi, a mineral option and this eye-focused concept.

Personalising and ordering the Lutein Eye Jelly formula

Personalization covers approved flavour and colour on this exact formula — project-specific personalisation, not a formula change. On a jelly stick the printed foil-laminate sachet and outer carton carry most of the shelf branding, so artwork and pack presentation do a lot of the differentiation work alongside whatever flavour a brand selects.

Changing the three-active combination, adding a fourth ingredient, or introducing a new claim moves the project into Formula Adaptation instead. Label claims plus market compliance remain the brand owner's responsibility throughout.

The actives in the standard formulation. Your final formula is confirmed with you before production.

Serving size
1 jelly
Servings / container
10
Pack count
10 jelly
Daily use
1 stick daily
Shelf life
24 months

Formula & nutrition

Values shown per recommended daily serving · % NRV (EU).

Active ingredients

Active Quantity % NRV
Bilberry extract
plant_extract · Vaccinium myrtillus
50 mg —
Lutein
Carotenoid
10 mg —
Zeaxanthin
plant_extract
2 mg —

Nutritional information

Nutrient Quantity % NRV
Energy 9 kcal —
Fat 0 g —
of which saturates 0 g —
Carbohydrate 3.5 g —
of which sugars 0 g —
of which polyols 3 g —
Protein 0 g —
Salt 0 g —

Product characteristics

  • Added sugar-free
  • Suitable for vegans
  • Suitable for vegetarians
  • Gelatin-free
  • Gluten-free
  • GMO-free
  • Artificial colour-free
  • Artificial flavour-free
  • Suitable for halal

Recommended use

Take 1 stick daily. Do not exceed the recommended daily intake. Food supplements should not be used as a substitute for a varied and balanced diet and a healthy lifestyle.

Warnings

  • Food supplements should not be used as a substitute for a varied, balanced diet and a healthy lifestyle. Do not exceed the recommended daily dose.
  • If pregnant, breastfeeding, taking medication or under medical supervision, consult a healthcare professional before use.
  • Keep out of the reach of young children. Discontinue use and consult a doctor if any adverse reaction occurs.
View all warnings & declarations
  • Store in a cool, dry place away from direct sunlight. Keep the pack tightly closed.
Allergens & declarations — no declarable allergens
  • Cereals containing gluten No
  • Crustaceans and products thereof No
  • Eggs and products thereof No
  • Fish and products thereof No
  • Peanuts and products thereof No
  • Soybeans and products thereof No
  • Milk and products thereof No
  • Nuts No
  • Celery and products thereof No
  • Mustard and products thereof No
  • Sesame seeds and products thereof No
  • Sulphur dioxide and sulphites No
  • Lupine and products thereof No
  • Molluscs and products thereof No
Documents

Documentation included with your order

DAT Supply is your contracting supplier. Every Private Label order includes the standard documentation for the DAT-supplied finished product, plus launch documentation for your selected market within the agreed scope. Independent lab testing is available on request.

View how documentation works →

  • Product specification Your confirmed formula, active amounts, serving, product configuration and packaging details.
    Included When your formula is confirmed
  • Nutrition & label data Product data, directions, warnings and nutritional / active information needed to prepare your label.
    Included With your specification
  • Artwork review & guidelines We review your artwork against the confirmed product information and provide label guidance before production. You approve the final artwork.
    Included Before production
  • Allergen information Product-specific allergen information based on the confirmed formulation and production information.
    Included With your specification
  • Market launch documentation Documentation prepared for your selected target market to support product launch and applicable notification or filing requirements. Requirements vary by product and market. Government filings and fees, translations, legalisation and additional market- or retailer-specific work are not part of the standard documentation.
    Included For your selected market
  • Batch release & traceability Your DAT finished-product batch / lot reference and the batch release and traceability documentation for the finished order.
    Included With your batch
  • Delivery documentation Packing list and applicable shipment / transport documentation.
    Included At dispatch
Third-party testing / Certificate of Analysis Optional Independent lab testing is available on request. Not part of the standard documentation: supplier CoAs and raw-material certificates, additional microbiology, heavy-metal or pesticide testing, retailer-specific due diligence, special certifications, export and legalisation, translations, and bespoke regulatory or legal work.

Documents land in your DAT Supply account as your order moves forward, based on the agreed product and scope. Final label use, market filings and product placement remain your responsibility unless expressly included in the agreed scope.

You may also like

Related options

FAQ

Frequently asked questions

  • Can I request a sample before ordering?
    Ready-to-ship samples of selected production-ready formulas are on the Samples page while in stock — not every product has one. To test a different flavour, colour or shape, configure this product; where the product offers a Personalization Sample, you can order one of that exact configuration at the review step. Samples are paid upfront, and you do not need an account to start.
  • What is the MOQ?
    Minimum order quantities for Lutein Eye Jelly are set up front, not quoted: from 3,000 boxes in stick pouch. Larger runs of the same formula stay Private Label, as a volume quote. A change to the formula itself is different: Formula Adaptation production starts from 60,000 sticks per SKU; the minimum is fixed for each format.
  • What packaging is available?
    Packaging for this format: Stick pouch. Standard pack size for this product is 10 jelly per pack. More options open up at higher volumes, and you pick your pack when you build your product.
  • Can I customise flavour, colour or shape?
    Yes — the flavour, colour and existing shape options this format supports are choices you make when you build your product, at the same unit price and with no setup fee. Where the product offers a Personalization Sample, you can test them first. The formula stays the same. Changing the actives or the dosage means Formula Adaptation instead, which starts higher; claims work is a Custom Project.
  • Who produces and supplies this product?
    DAT Supply is your contracting supplier for the products it supplies. We manage the product, production and documentation workflow. The country of manufacture is confirmed for the specific products you choose.
  • What documents are provided?
    DAT Supply is your contracting supplier, and every Private Label order includes product specification, nutrition & label data, artwork review & guidelines, allergen information, market launch documentation, batch release & traceability and delivery documentation for the DAT-supplied finished product. Each one lands in your account at the point it exists — the specification when your formula is confirmed, the batch documents with your batch. Independent lab testing is available on request.
  • How long does production take?
    Standard production lead time is approximately 8 weeks after formula/specification, artwork and payment are approved. Shipping/transit is additional.
  • What happens after I place an order?
    Your order moves through the standard DAT Supply stages — sample, configure, approve artwork and specification, produce, deliver. Live order progress and every released document appear in your DAT Supply account, not on this public page. How ordering works →

Have questions?

Find answers about ordering, samples, packaging and production timelines.

Open Help Center

Contact DAT Supply

Need help with this product or a specific order? Our team replies by email.

Contact DAT Supply
Quick context request

Get manufacturing context

Drop your work email and a member of the DAT team will follow up with the right context for this product. Order documents, certificates and pricing are released in your DAT Supply account.

You will receive a short confirmation email. Order documents (specification, label data, batch documents) are released in your DAT Supply account once your order is under way.