Skip to content

Configure, sample and produce your supplement range in one place.

DAT Supply
Log in
Navigation
Profile
Dihydroberberine — supplement ingredient
Functional compounds

Dihydroberberine

Dihydroberberine is used in private-label supplement manufacturing. Sourcing, dose anchors and target-market documentation are reviewed per project.

View options with Dihydroberberine Browse ingredients
Type
Other
Family
Functional compounds
Measured in
mg
Why brands use it

Why brands use Dihydroberberine

Dihydroberberine is a formulation input reviewed per project, sitting in the functional compounds family. On DAT Supply briefs the positioning is set by the brand brief and reviewed against the target market’s claim rules — we do not pre-position an active for any single benefit. Editorial framing uses only EU 432/2012- or DSHEA-compatible wording — we never promote unauthorised claims, even when the active has consumer-side momentum. Format-wise we have considered Dihydroberberine for gummies, powder stick, jelly and strip; the per-format formulation notes below describe the live constraints (taste, payload, stability, packaging) we tune in the formulation pass. Sourcing form (extract ratio for botanicals, salt or chelate form for minerals, free-form vs ester for amino acids) is reviewed against the brief, with documentation matched to the target market’s import rules. Inclusion rate and claim wording are reviewed per project — we don’t publish off-the-shelf doses.

Formulation

How we use Dihydroberberine in formulas

A public-safe formulation reference — how this active behaves in our formats, common pairings and handling notes. Final formulation, dose and on-pack copy are confirmed per project.

Heat stable
Limited — use coated forms
Soluble in matrix
Conditional
Vegan supply
Project-specific
Claim wording

EU-authorised health claims

EU-authorised wording for this ingredient is reviewed per project against Reg. 1924/2006 and the authorised list under Reg. 432/2012. No final claim wording is implied by this page.

Dihydroberberine is reviewed against the target market’s claim posture: EU 432/2012 wording (UK tracks EU post-Brexit) for the EU/UK route, and DSHEA structure-function wording with the FDA disclosure for the US route. Pack copy is rewritten per market and confirmed per project.

EU-authorised health claims

Authorised at ≥15% NRV per daily serving. Claim wording must appear verbatim on consumer packaging. DAT reviews final pack copy per project against EU 1924/2006 and the authorised list under EU 432/2012.

Formats

Formats we review Dihydroberberine in

DAT Supply's live catalogue covers gummy, powder sachet, functional jelly, pet soft chew and oral strip formats. Each row is a format this active is reviewed for and what changes when it is delivered that way.

Delivery formats Dihydroberberine is reviewed for, and what changes in each
Format What changes in this format
Gummies In DAT Supply's pectin-based gummy matrix, Dihydroberberine is reviewed for heat stability through the cooking step, dispersibility across the dosed mass, and any flavour interaction with the cooked base. Coated or encapsulated forms may be considered when the raw active would shift taste or colour outside the target window. Per-gummy payload, daily serving count and the resulting label claim are tuned against the brand’s pack architecture. Pectin sets at a lower cooking temperature than a gelatin gummy base, which is one reason heat-sensitive actives more often survive the process — moisture migration and shelf-life are reviewed per project alongside the active’s sensitivity to acidity, light and oxygen. Where a high inclusion rate would compromise gummy texture, we split the load across two pieces or move to a denser format. Final dosing is confirmed per project.
Powder sticks In a single-serve sachet format Dihydroberberine is reviewed for powder flow, dose accuracy at the sachet weight, and any need for moisture- or oxygen-barrier packaging. Reconstitution behaviour when the sachet is dosed into water is reviewed against the target sensory window — particle size, dispersibility, foaming and any settling are tuned during the formulation pass. Sachets carry higher payloads than gummies or capsules, which can suit actives with a larger per-serving dose. Premix uniformity is verified before the run, with sweetener, acidulant and any flow agent reviewed against the active’s stability profile. Pouch material and any oxygen scavenger are set per project.
Functional jellies In a single-serve functional-jelly format Dihydroberberine is reviewed for matrix set strength, heat exposure through cooking and any colour interaction with the jelly base. Cup or pouch packaging is matched against the target shelf-life and the brand’s shopper context. The format reads as a hybrid between a gummy and an oral liquid — sensory is the primary tuning lever, with flavour, sweetness and acid balance reviewed alongside any colour load. Per-cup payload is set against the brand’s daily serving plan and claim wording. Final matrix system, cup format and packaging barrier are confirmed per project.
Oral strips In an oral-strip (orodispersible film) format Dihydroberberine sits within a payload window of roughly tens of milligrams per strip — high-dose actives drop out of the format. Sensory and dissolution constraints, polymer-base compatibility (pullulan or HPMC) and any residual mouthfeel are reviewed against the brand’s sensory target. Strip thickness, film flexibility and the print / branding layer are tuned per project. Where the active is bitter, a taste-masking system is layered into the film. Strips read as a daily-wellness, on-the-go format and the brand’s pack format (peelable wallet, single-strip sachet) is set against the distribution plan.
Serving

Typical serving and reference level

Where the serving level for Dihydroberberine is set, and who sets it. The figure that reaches your label is fixed against the specification for your formula and your market — not read off this page.

Measured in
mg
Reference level

Typical anchor: mg per serving — confirmed per project.

Dihydroberberine is measured by weight (mg) per serving on DAT Supply briefs. The working anchor — the inclusion rate against which target-market claim wording is reviewed — is set during the formulation pass for each project rather than published as a fixed number on the public page. Final per-serving load depends on the chosen format (gummy payload window, capsule fill weight, softgel oil load, sachet or powder scoop size, oral-liquid bottle geometry) and the claim wording the brand needs to support against the target market. Sourcing form (extract ratio, standardised marker, micronised vs granular, salt or chelate form) is reviewed in the same pass. Country-level upper limits (France, Italy, Belgium for the EU; California Prop 65 for the US) are checked before any inclusion rate is finalised. Dose is confirmed per project — we don’t publish off-the-shelf dose tables for any active in the catalogue.

Formulas

Formulas using Dihydroberberine

Dihydroberberine is not yet in a live catalogue formula. Browse the catalogue for a starting formula to build a project around it.

Adjacent actives

Ingredients that sit alongside this one

Start

Build a formula around Dihydroberberine

Explore the private-label options that use Dihydroberberine — review formula, format and packaging on each product before you commit.

View options Browse ingredients
Quick context request

Get manufacturing context

Drop your work email and a member of the DAT team will follow up with the right context for this product. Order documents, certificates and pricing are released in your DAT Supply account.

You will receive a short confirmation email. Order documents (specification, label data, batch documents) are released in your DAT Supply account once your order is under way.